|
| |
Please notify me about new products, reviews, events & audiophile news. |
| |
|
| |
|
| |
|
| |
| |
Fiber Glass Cable Flostar |
|
Flostar Flexible Cables creating a sensation all over the country; are only suitable cables for Thermal Class-'B'. These cables having an oustanding and unique combination of electrical, mechanical, thermal and chemical properties are available in different colours. Flostar cables are the complete solution to the many difficult problems where present ordinary cables and other type of fibreglass cables are not satisfactory. |
| Flostar insulation adds singnificanty to the tensile the mechanism of load transffer because the insulation has such a superior break strength |
|
| Insulation meterial depends upon the electrical and mechanical properties desired and the environments. The most common meterial are polyethlene and PVC. |
|
|
| The structure of insulation is oriented biaxially. Propagation of tears is difficult. Uniaxial orientation makes it easy to tear the insulation along the axis of wire. |
|
|
The multiple layer construction of Mylar insures high dielectric quality of insulation. Any flaw is limited to a single layer of the tape. The wrapping and braiding process places the insulation concentrically around the conductor and does not force it into the interstices between the conductor. |
| |
Higher Cut Through & Abrasion Resistant |
|
Flostar insulation is remarkable resistant to cut through and scrap abrasion. Thin cross sections of Mylar 0.004 to 0.007 thick will endure greater cut through stress and general abuse than 0.010° to 0.020° of insulation such as PVC Nylon jacketed PVC and others. |
|
| |
|
Flostar insulation adds significantly to the tensile strength of the insulated conductor through the mechanism of load transfer because the insulation has such a superior break strength. It will support the wire at each point where excessive stretching occurs. Wire insulated with conventional materials will break since there is no support from the insulation. |
|
| |
|
| For short periods +150° C. Continuous -40° C to +130° C. |
|
| |
|
| The insulation is produced synthetic film and fibre. It has very high flex life in comparison to any to any other insulating materials. |
| CONDUCTOR : Bunched / Stranded Tinned / Bare Copper as per IS: 8130 - 1976, Class - 5 |
| INSULATION : Mylar (Biaxially oriented PTP Film) 100 wrapped & laminated with Fibreglass outer braid and overall coatings of Insulating Varnishes. |
| WORKING VOLTAGE : 600 / 1100 VOLTS A.C.R.M.S. |
|
| |
|
| |
| Technical Details |
Other Products |
|
|
|
| |
| |
| Back Page |
 |
Naex page |
 |
|
|
| |
|
|
|
